MQP LOGOPRODUCT DATA SHEET


AD454 PICTURE AD454 PICTURE

AD488 and AD574

Programming Adapters for Mototola MC68HC05B6 and MC68HC705B16 (52 pin PLCC and 64 pin QFP)


Product Code Pins on skt Pins on Base Wiring Code Package Base pitch" Miscellaneous
AD488 52 48   P .6 Eject

Product Code Pins on skt Pins on Base Wiring Code Package Base pitch" Miscellaneous
AD574 64 48   Q .6 Clamshell

For use on the following programmers

See Also: For 56 pin SDIP use AD509

Note (AD488):

This data sheet refers to adapters marked AD488A. The AD488 was for 68HC05B6 only. AD488A requires PROMDRIVER version 1.70 or later.

Device types

Device package:

Programmer socket: 48 pin DIL

Socket Specification:

Insertions:

Replaceable: Yes

Programming Notes

MC68HC705B16 (using Pin-Master 48)

MC68HC05B6 (using Pin-Master 48)

General: This range of package converters is manufactured in England to the highest standards by MQP Electronics. Every adapter sold is tested using an actual device. Our distributors should have no difficulty in supplying you quickly with any item. Specifications of our adapters can be found on our Web Site (www.mqp.com)

If you have any difficulty in identifying the correct converter our sales office will be pleased to advise. Our phone number is +44 1666 825 666.

Connections:

52 Pin PLCC Socket 64 pin QFP Socket Signal Name 48 Pin DIL BASE
1 11 TCMP2 -
2 12 TCMP1 -
3 13 PD7 -
4 14 PD6 -
5 15 PD5 -
6 16 NC -
7 17 VRL 15,34 (was nc on AD488)
8 18 VRH 44 (was nc on AD488)
9 19 PD4 10 (was 15,34 on AD488)
10 20 VDD 44, Schottky Diode -
11 21 PD3 9 (was 44 on AD488)
12 22 PD2 8 (was nc on AD488)
13 23 PD1 7 (was nc on AD488)
14 24 PD0 -
15 27 NC/VPP6 5 (was nc on AD488), Diode +
16 28 OSC1 24
17 29 OSC2 -
18 30 \RESET 23
19 31 \IRQ 25
20 32 PLMA -
21 33 PLMB -
22 34 TCAP1 (1) 44
23 35 TCAP2 -
24 37 PA7 -
25 38 PA6 -
26 39 PA5 -
27 40 PA4 -
28 41 PA3 -
29 42 PA2 -
30 43 PA1 -
31 44 PA0 -
32 47 PB7 -
33 48 PB6 -
34 49 PB5 -
35 50 PB4 -
36 51 PB3 -
37 52 PB2 -
38 53 PB1 -
39 54 PB0 -
40 57 VPP1 NC
41 58 VSS 15,34
42 59 PC7 16 (was nc on AD488)
43 60 PC6 -
44 61 PC5 -
45 62 PC4 -
46 63 PC3 -
47 64 PC2 -
48 1 PC1 -
49 2 PC0 -
50 8 RDI 27
51 9 SCLK -
52 10 TDO 26
All other pins NC all other pins 100K PULLUP to VDD
  1. Uses AUT-PLCC52-01 + AUB-DIP48-01
  2. A capacitor (eg 10nF) is fitted to bypass VDD supply.
  3. A capacitor (eg 10nF) is fitted to bypass VPP6 supply.

In-circuit programming (MC68HC05B6 only)

The device may be programmed in circuit provided the proper conditions exist. For more information see the device data sheet. The following connections on the Pin-Master 48 JTAG socket may be used, in place of AD488 . In-circuit programming requires a good understanding of the device in question, and of the circuit containing the device.

Connections on Pin-Master 48 JTAG (AUX) connector (viewed from front and above)
GND GND GND GND GND
OSC1 \RESET RDI TDO \IRQ

 

# The RoHS symbol with the # mark attached means that a RoHS compliant version of this item is available on request.