PRODUCT DATA SHEET

Product Code	Pins on skt	Pins on Base	Wiring Code	Package	Base pitch"	Miscellaneous
AD632	100	40		Q	.6	Clamshell

For use on the following programmers

• Pin-Master 48
• System 2000 with programming module MP3
• Also suitable for any other programmer capable of programming the appropriate algorithm FZTAT128V3A, FZTAT256V3A, FZTAT512V3A or FZTAT512V5A

Device types (typical)

Device package: 100 pin QFP

• FP-100B (Not FP100A or TFP-100B)

Socket Specification:

Insertions: 5000

Replaceable: No

Instructions for Use (3rd Party Programmers):

1. Select appropriate device type Hitachi FZTAT... or Hitachi HD64F30.... on programmer.
2. Program as normal.
3. To avoid activating reset circuit, do not verify below Vcc = 2.9V
4. Note: the adapter has a power on reset time of approx 70ms. The programmer must allow for this.

The above precautions would be automatically met on most programmers by setting device type Hitachi FZTATxxxV3A or Hitachi HD64F30xx. The information is given to assist manufacturers of third-party programmers.

General: This range of package converters is manufactured in England to the highest standards by MQP Electronics. Every adapter sold is tested using an actual device. Our distributors should have no difficulty in supplying you quickly with any item. Specifications of our adapters can be found on our Web Site (www.mqp.com)

If you have any difficulty in identifying the correct converter our sales office will be pleased to advise. Our phone number is +44 1666 825 666.

Connections: