MQP LOGOPRODUCT DATA SHEET

AD392/3 PICTURE

AD447 and AD448

Package Converter for Programming Hitachi HD64F3644 (H8-3644F)

(64 pin SDIP and 64 pin QFP)

Product Code Pins on skt Pins on Base Wiring Code Package Base pitch" Miscellaneous
AD447 64 32   SD .6  

Product Code Pins on skt Pins on Base Wiring Code Package Base pitch" Miscellaneous
AD61 64 32   Q .6 Clamshell

For use on the following programmers

General Description

AD447 and AD448 are part of a family of standard adapters conforming entirely to Hitachi specifications.

Important Note

The H8-3644F microprocessor has a programming algorithm similar to but not identical to the Hitachi 28F101. As a result most programmers which can program the 28F101 can easily be set by their manufacturers to program this micro part. However this will require the microprocessor part to be selected in the programmer's device menu, not the 28F101. The MQP programmers mentioned above have a suitable algorithm setting. Using another manufacturers programmer with this Hitachi micro will depend on getting a software update from that manufacturer covering this part.

Device type

Device package:

AD447:64 pin plastic SDIP

AD448:64 pin plastic QFP

Programmer socket: 32 pin DIL

Note: AD447 is supplied complete with an extension adapter to ensure physical compatibility with most third party manufacturers programming equipment.

Socket Specification:

Insertions:

Replaceable: No

Instructions for Use:

  1. Select device type Hitachi HD64F3644 on programmer.
  2. IMPORTANT: Ensure that ID checking on programmer is disabled to prevent damage to A9 pin on micro. (This device does not have a silicon signature.)
  3. Ensure that address range is set to 00000-07FFF.
  4. Insert AD447 or AD448 in programmer socket as appropriate.
  5. Program as normal.
  6. To avoid activating reset circuit, do not verify below Vcc = 3.75V
  7. Note: the adapter has a power on reset time of approx 70ms. The programmer must allow for this.

The above precautions would be automatically met on most programmers by setting device type HD64F3644. The information is given to assist manufacturers of third-party programmers.

General: This range of package converters is manufactured in England to the highest standards by MQP Electronics. Every adapter sold is tested using an actual device. Our distributors should have no difficulty in supplying you quickly with any item. Specifications of our adapters can be found on our Web Site (www.mqp.com)

If you have any difficulty in identifying the correct converter our sales office will be pleased to advise. Our phone number is +44 1666 825 666.

Connections:

64 Pin SDIP Socket 64 Pin QFP Socket Signal Name 32 Pin DIL BASE Comments
19 11 VPP 1
59 51 FA16 2
60 52 FA15 3
43 35 FA12 4
47 39 FA7 5
48 40 FA6 6
49 41 FA5 7
50 42 FA4 8
51 43 FA3 9
52 44 FA2 10
53 45 FA1 11
54 46 FA0 12
33 25 FO0 13
34 26 FO1 14
35 27 FO2 15
5,11,14,15 3,6,7,61 VSS 16
36 28 FO3 17
37 29 FO4 18
38 30 FO5 19
39 31 FO6 20
40 32 FO7 21
46 38 \CE 22
1 57 FA10 23
64 56 \OE 24
42 34 FA11 25
24 16 FA9 26
63 55 FA8 27
44 36 FA13 28
45 37 FA14 29
- - nc 30
58 50 \WE 31
2,4,6,12,25,26,27,28, 29,30,31,32,41 4,17,18,19,20,21,22, 23,24,33,58,60,62 VCC 32
18 10 \RES - from P.O.R. circuit
16 8 OSC1 - oscillator circuit
17 9 OSC2 - oscillator circuit
all pins not mentioned are 'no connect'

Fitted capacitors need not normally be modified but the following information is provided to assist our customers in special technical situations:

1. A capacitor (eg 10nF) is normally fitted to bypass VPP supply.

2. A capacitor (eg 10nF) is normally fitted to bypass VCC supply.

Apr 5 2000: Typo on VPP pin, (64 pin QFP) corrected.

# The RoHS symbol with the # mark attached means that a RoHS compliant version of this item is available on request.