PRODUCT DATA SHEET

Product Code	Pins on skt	Pins on Base	Wiring Code	Package	Base pitch"	Miscellaneous
AD358	28	28	01	TS	.6	GANG

For use on the following programmers

• Any programmer capable of programming 28 pin DIL version of same device
• It may also be used for reversed TSOP packaged devices, by removing the plastic inlay and inserting the device 'dead bug' and reversed end to end. (MQP device type menus will refer to AD358 (reversed).

Device types (examples only)

Device package: 28 pin TSOP (Standard Orientation)

Programmer socket: 28 pin DIL

Note: AD358 is especially useful for gang programmers, as it is less than 0.9" wide, to allow fitting to adjacent DIL socket positions.

Socket Specification:

Insertions: 5000

Replaceable: Yes

General: This range of package converters is manufactured in England to the highest standards by MQP Electronics. Every adapter sold is tested using an actual device. Our distributors should have no difficulty in supplying you quickly with any item. Specifications of our adapters can be found on our Web Site (www.mqp.com)

If you have any difficulty in identifying the correct converter our sales office will be pleased to advise. Our phone number is +44 1666 825 666.

Connections:

1. A capacitor (eg 10nF) is normally fitted to bypass Vpp supply. We can supply the adapter without this adapter fitted on request.

2. A capacitor (eg 10nF) is normally fitted to bypass Vcc supply. We can supply the adapter without this adapter fitted on request.