MQP LOGOPRODUCT DATA SHEET


AD345 PICTURE

AD344, AD345 and AD346 (AD345 shown)

Programming Adapters for MC68HC705B5 / B16 / B32 / X32

52 pin PLCC, 64 pin QFP and 56 pin SDIP


Product Code Pins on skt Pins on Base Wiring Code Package Base pitch" Miscellaneous
AD344 52 42   P .6  

Product Code Pins on skt Pins on Base Wiring Code Package Base pitch" Miscellaneous
AD345 64 42   Q .6  

Product Code Pins on skt Pins on Base Wiring Code Package Base pitch" Miscellaneous
AD346 56 42   SD .6  

For use on the following programmers

Device types

Device package:

Programmer socket: 42 pin DIL

Socket Specification:

Insertions:

Replaceable: Top board of adapter may be replaced

General: This range of package converters is manufactured in England to the highest standards by MQP Electronics. Every adapter sold is tested using an actual device. Our distributors should have no difficulty in supplying you quickly with any item. Specifications of our adapters can be found on our Web Site (www.mqp.com)

If you have any difficulty in identifying the correct converter our sales office will be pleased to advise. Our phone number is +44 1666 825 666.

Notes for use:

Owing to the unique programming method defined by Motorola, not all of the normal programming equipment functions are available when programming these parts. Also as verification following programming is controlled by the device itself, programming errors caused by poor pin contact may not be detected, so worn adapters should be discarded.

Where possible we have provided a read capabilty. Read, and separate Verify functions, where available, depend on the device not having been locked! (ie SEC bit must be 1 to read device). To examine contents of device use READ function, and then DISPLAY BUFFER (local or PC controlled).

# The RoHS symbol with the # mark attached means that a RoHS compliant version of this item is available on request.