MQP LOGOPRODUCT DATA SHEET

AD550 PICTURE

AD342, AD343, AD682 and AD696

Programming Adapters for
NEC uPD78P064 and uPD78P0308

(100 pin QFP)

Product Code Pins on skt Pins on Base Wiring Code Package Base pitch" Miscellaneous
AD342 100 32   Q .6 Clam

Product Code Pins on skt Pins on Base Wiring Code Package Base pitch" Miscellaneous
AD343 100 32   Q .6 Clam

Product Code Pins on skt Pins on Base Wiring Code Package Base pitch" Miscellaneous
AD682 100 32   Q .6 Clam

Product Code Pins on skt Pins on Base Wiring Code Package Base pitch" Miscellaneous
AD696 100 32   Q .6 Clam

For use on the following programmers

Device types
AD342
NEC

uPD78P0308GF-3BA
uPD78P0308YGF-3BA
AD343
NEC
 uPD78P064GC-7EA
uPD78P064YGC-7EA
AD682
NEC
 uPD78P0308GC-8EU
uPD78P0308YGC-8EU
AD696
NEC
 uPD78P064GF-3BA
uPD78P064YGF-3BA

 


Notes for use:
AD342
uPD78P0308
GF

Pin-Master 48

  • Select Device type NEC uPD78P0308GF on programmer
  • Install AD342 in programmer socket
  • Proceed as normal

Other Programmers

  • Select the specified EPROM device type (NEC uPD27C1001A)
  • Install AD342 in programmer socket(s)
  • Turn off ID checking on programmer
  • Set address range to 0000-EFFFh
  • Proceed as normal
AD343
uPD78P064
GC

Pin-Master 48

  • Select Device type NEC uPD78P064GC on programmer
  • Install AD343 in programmer socket
  • Proceed as normal

Other Programmers

  • Select the specified EPROM device type (NEC uPD27C1001A)
  • Install AD343 in programmer socket(s)
  • Turn off ID checking on programmer
  • Set address range to 0000-7FFFh
  • Proceed as normal
AD682
uPD78P0308
GC

Pin-Master 48

  • Select Device type NEC uPD78P0308GC on programmer
  • Install AD682 in programmer socket
  • Proceed as normal

Other Programmers

  • Select the specified EPROM device type (NEC uPD27C1001A)
  • Install AD682 in programmer socket(s)
  • Turn off ID checking on programmer
  • Set address range to 0000-EFFFh
  • Proceed as normal
AD696
uPD78P064
GF

Pin-Master 48

  • Select Device type NEC uPD78P064GF on programmer
  • Install AD696 in programmer socket
  • Proceed as normal

Other Programmers

  • Select the specified EPROM device type (NEC uPD27C1001A)
  • Install AD696 in programmer socket(s)
  • Turn off ID checking on programmer
  • Set address range to 0000-7FFFh
  • Proceed as normal

 

 

Device package
AD342
100 pin QFP (Fine Pitch)
14 x 20 mm
AD343
100 pin QFP (Fine Pitch)
14 x 14 mm
AD682
100 pin QFP (Fine Pitch)
14 x 14 mm
AD696
100 pin QFP (Fine Pitch)
14 x 20 mm

Programmer socket: 32 pin DIL

Socket Specification:

Insertions:

Replaceable: No

General: This range of package converters is manufactured in England to the highest standards by MQP Electronics. Every adapter sold is tested using an actual device. Our distributors should have no difficulty in supplying you quickly with any item. Specifications of our adapters can be found on our Web Site (www.mqp.com)

If you have any difficulty in identifying the correct converter our sales office will be pleased to advise. Our phone number is +44 1666 825 666.

Connections:

100 Pin QFP
Socket (AD342)
 100 Pin QFP
Socket (AD696)
100 Pin QFP
Socket (AD343)
100 Pin QFP
Socket (AD682)
Signal
Name
32 Pin DIL
BASE
6   78 and CAP1 78 and CAP1 VPP 1
90   62 62 A16 2
84   56 56 A15 3
87   59 59 A12 4
92   64 64 A7 5
93   65 65 A6 6
94   66 66 A5 7
95   67 67 A4 8
96   68 68 A3 9
97   69 69 A2 10
98   70 70 A1 11
99   71 71 A0 12
43   15 15 D0 13
44   16 16 D1 14
45   17 17 D2 15
12,40,GND,
CAP1 and CAP2		   9,12,84,GND,
CAP1 and CAP2		 12,84,GND,
CAP1 and CAP2		 VSS 16
46   18 18 D3 17
47   19 19 D4 18
48   20 20 D5 19
49   21 21 D6 20
50   22 22 D7 21
20   92 92 \CE 22
89   61 61 A10 23
19   91 91 \OE 24
88   60 60 A11 25
13   85 85 A9 26
91   63 63 A8 27
86   58 58 A13 28
85   57 57 A14 29
    nc nc   30
15   87 87 \PGM 31
9, 36, 37 and CAP2   8, 81 and CAP2 8, 9, 81 and CAP2 VDD 32

7 and 11
no connection

all other pins 10K
pulldown resistors

 

  

79 and 83
no connection

all other pins 10K
pulldown resistors

79 and 83
no connection

all other pins 10K
pulldown resistors

    
  1. Capacitor (10nF) is fitted to bypass the VCC supply.
  2. Capacitor (10nF) is fitted to bypass the VPP supply.
# The RoHS symbol with the # mark attached means that a RoHS compliant version of this item is available on request.