PRODUCT DATA SHEET

AD302

Package Converter for EP610 (28 pin PLCC)

Product Code	Pins on skt	Pins on Base	Wiring Code	Package	Base pitch"	Miscellaneous
AD302	28	24	07	P	.6	Eject, Gang

For use on the following programmers

Any programmer capable of programming the 24 pin DIL version of the same device

Device types

Altera
- EP610, EP610I, EP610T

Device package: 28 pin PLCC

Programmer socket: 24 pin DIL

Note: AD302 is especially useful for gang programmers, as it is less than 0.9" wide, to allow fitting to adjacent DIL socket positions.

Socket Specification:

Insertions: 5000

Replaceable: Yes

General: This range of package converters is manufactured in England to the highest standards by MQP Electronics. Every adapter sold is tested using an actual device. Our distributors should have no difficulty in supplying you quickly with any item. Specifications of our adapters can be found on our Web Site (www.mqp.com)

If you have any difficulty in identifying the correct converter our sales office will be pleased to advise. Our phone number is +44 1666 825 666.

Connections:

28Pin PLCC Socket	Signal Name	24 Pin DIL BASE
1	VCC	24
2	CLK1	1
3	INPUT	2
4	I/O	3
5	I/O	4
6	I/O	5
7	I/O	6
8	I/O	7
9	I/O	8
10	I/O	9
11	NC	-
12	I/O	10
13	INPUT	11
14	GND	12
15	GND	12
16	CLK2	13
17	INPUT	14
18	I/O	15
19	NC	-
20	I/O	16
21	I/O	17
22	I/O	18
23	I/O	19
24	I/O	20
25	I/O	21
26	I/O	22
27	INPUT	23
28	VCC	24

No bypass capacitors are fitted to this adapter

Other References:

# The RoHS symbol with the # mark attached means that a RoHS compliant version of this item is available on request.